These are new generation sandblasters - cleaning faster (a stream of abrasive material 3x faster than a sandblaster, with a speed of 965 km/h), while using less abrasive (higher impact force of the abrasive particle on the surface) and producing less dust.

Versatility of cleaning abrasives - SBS devices can blast with all cleaning abrasives available on the market, i.e. soda, sand, crushed glass, glass beads, corundum, garnet, corn grits and nut shells. The machines operate in three modes: dry, in a water mist cover (reducing dusting) and in a water mix (no dusting). Efficiency - SodaBlast Systems machines clean dirt that other sandblasters have difficulty with.

Soda stream shoots out at 965 km/h, and heavier abrasives around 800 km/h.

Thanks to this speed, you can clean up to 2-3x more surfaces in the same time as a sandblaster. Saving abrasive and fuel. Which translates into profit.

In the innovative design of SBS machines, the problem of unfavorable weather has been eliminated. Machines can be used in all weather conditions, also during frost or rain.

Even one person can operate it without any help.

So far, the effectiveness of the machine has been tested in practice with hoses 200 meters long horizontally, and 150 meters vertically when cleaning an industrial chimney.

All kinds of paints, varnishes, organic dirt, tarnish, grease, oil, fire soot, plaster, graffiti or rust. Unlimited number of possibilities. Customers constantly surprise us with new cases.

In the building industry (buildings, facades), industrial sector (machines, structures), automotive (bodies of vintage and modern cars), marine (boats), road constructions (bridges, viaducts, roads), monuments (statues, sculptures), and many others, where renovation/refreshing/cleaning is required.

Soda extends the possibilities of the existing sandblasting. After sandblasting, the surface is rough. For example, after removing paint from glass or metal sheet with soda, the surface is smooth and intact, and in the case of delicate sheets, the surface remains undeformed, which is of key importance in car bodywork.

We entered the market in 2009 and we successfully and continuously promote the technology in Poland and Central Europe. We have clients in countries such as Germany, Denmark, Austria, Montenegro, Czech Republic, Slovakia, Russia, Norway, Sweden, Finland, Lithuania, Latvia and Estonia.

The market is huge and constantly expanding. There is always something to clean and renovate. Even new surfaces/objects will require cleaning after a few years. Just look at how widely the SodaBlast Systems technology is used in the industry.

For private individuals, companies, government brnaches, monument conservators, industrial plants, housing associations, etc.

Companies with sandblasters are thriving, and with this machine you can do 2-3x more work than with a regular sandblaster.

We have a current Opinion on Innovation for the next 3 years, issued by the national Scientific Unit.

Our offer is addressed to customers from Poland and Europe.

It depends on what we clean and the degree of dirt. Per hour from 5m2h to 60m2h.

We offer complete technology - machine, training (in operating, practical blasting, costing and pricing), service, supply of cleaning abrasives and accessories.

Baking soda, used as a cleaning cloth, is biodegradable and water-soluble when blasted on the surface during cleaning.

Yes, thanks to SodaBlast Systems machines you use less cleaning abrasive, even if it is sand. Comparing the consumption, in SodaBlast Systems machines you use sand bags (25 kg), and in traditional sandblasters you use big bags of sand (1000 kg) while cleaning the same surfaces.

Due to the lower consumption of cleaning abrasive, the amount of dust is also lower with SodaBlast Systems machines. The reason for the lower consumption is the higher jet speed (965 km/h)

Water is used only to reduce dust (method with a water adapter) or eliminate dust (method in a water mix). Water sticks to the cleaning cloth, increases its mass and therefore falls to the floor faster.

Compliant with EU standards for construction machinery.

If you know what you want to use the machine for and for what purposes, we are able to choose the right model for your needs.

We do not recommend buying "just to start with". Buy a model that will develop and give opportunities cleaning many types of surfaces and objects, now and in the future.

U.S. production. Each blaster is imported to the European market with a CE certificate issued in the USA during production by a European Notified Body.

Yes, such compressors are also used with sandblasters for professional purposes.

You pull such a set behind the car and in the car you only transport abrasive (500-1000 kg), accessories and hoses. You can always disconnect the trailer from a car while the blaster is used and transport abrasive, fuel or even food.

No, because the own chassis will be a freight chassis, and this makes it impossible to permanently mount the machine due to the lack of appropriate homologation as a special trailer, which is checked on the roads by the authorities. Our chassis are properly approved as a machine, not a cargo trailer. So you can move around with no problem. In addition, our special chassis have a suitable frame that is designed to mount this type of equipment safely during transport.

Yes, but we do not recommend this solution: 1) The set must be uncovered during operation due to the large amount of heat generated 2) The uncovered set also works as an advertisement during stops and transport, on which there is an advertisement about the services offered These machines run smoothly for a long time. There's absolutely no need to cover them with a tarp.

B+E, i.e. B category with the ability to tow heavy trailers.

We do not propose such a solution, because it is inefficient. In this situation, there is no load capacity in the car for abrasive (500-1000 kg is usually taken for a working day with 1-2 types of different abrasives), the driver and a possible passenger. In addition, the machines generate a lot of heat during working and they must be properly cooled for proper operation, hence it is best if they are uncovered and mounted on a specialized trailer, i.e. the Trailer version.

It is baking soda. Caustic soda is a completely different chemical compound. Please distinguish between baking soda and caustic soda. Baking soda, with the chemical formula NaHCO3, commonly known as bitter salt, is used in the food and pharmaceutical industries. It is used as one of the ingredients of baking powder, a pH-regulating food additive, a component of effervescent powdered drinks and effervescent tablets, in medicine (in case of overacidity), in foam extinguishers (as a component of the alkaline part of the extinguisher - along with dissolved foaming agent), as a substance that absorbs odors and moisture and for softening water.

Unlike sandblasting, soda blasting is non-invasive. Soda has a lower mass and is more delicate than sand. After sodablasting, the surface remains smooth. When sand hits the surface, it sticks to it, causing it to become rough. Soda is not a substitute for sand in cleaning methods and sand is no substitute for soda. These are two different abrasives with different effects. Therefore, soda extends the possibilities of the existing sandblasting with non-invasive cleaning, especially in the construction or automotive industry. This significantly expands the scope of work that could not be done before.

We offer soda packed in 25 kg bags - 40 bags on a pallet (1000 kg).

We sell baking soda like others, but ours is produced specifically for blasting and not for other purposes for which baking soda can be used, such as washing powder. The issue of granularity, purity of granules, their hardness, sharpness, resistance, moisture, etc.

You can put both soda and sand into the machine. Of course, only one type of cleaning abrasive at a time.

Yes, you can put any cleaning materials that are suitable for blasting into the machines - i.e. baking soda, crushed glass, sand, corundum, garnet, copper slag, nut shells, corn, steel shot, etc.

Round and flat nozzles in various sizes. The better the nozzle is matched to the surface and dirt, the more efficient the cleaning process.

The machine comes with a standard round nozzle in its basic set.

Round nozzles for a concentrated stream, e.g. for multiple coats of paint. Flat nozzles for flat surfaces, e.g. building facades, paving stones.

Yes, but they will wear out quickly. Nozzles from our offer withstand 1000-1500 hours of work, counted with sand. This is a very good result.

In the machine price list you will find equipment packages that include the most frequently purchased accessories, nozzles and hoses when buying a machine.

We offer extensions in rolls of 40 meters.

Equipment for the operator can be found in the accessories catalogue. Full-face silicone masks will ensure free and pleasant work. In addition, a suit resistant to a blasting stream will ensure safety. We also have modern helmets of the American brand RPB with a Hot/Cold air conditioner.

We offer basic training in machine operation, as well as an expert training for the operator of soda blasting machines, teaching practical cleaning and marketing in the industry consisting in costing and pricing services.

There is a training for each machine. Expert training for soda blasting machine operator is optional depending on the model. Details can be found in the machine price list.

First undergo expert training as a soda blasting machine operator, then gain experience over time.

Yes, we recommend groups of up to 3 people at a time for training. Larger groups require individual arrangements. Only your company is on the training course. There are no other participants.

Training dates are agreed individually with the customer who purchased the device. Not earlier than before paying for the machine and/or registering the chassis with the Department of Communications (for Trailer versions).

We are a company selling machines. Training is offered only to our customers who have purchased machines.

24 months warranty in Poland. 12 months in Europe.

Service at the customer's site or in service branches.

Same service as under warranty.

Hoses and nozzles wear out, you have to replace them yourself every 1000-1500 hours of work, depending on the used abrasive. In Trailer sets, once a year or every 250-500 hours (depending on the model), periodic service inspections are required by an authorized service.

If you own a company (self-employed / Ltd.), you can also buy a machine via lease through a bank.

We cooperate with many large banks in Poland - PKO Leasing, EFL, Alior Leasing, Millennium.

Up to 72 months (6 years)).

Each offer is valued by the bank on the basis of the client's financial history (KRD database, BIK, etc.), his current income. There are no sample offers. If you want to know how much the installment will be, add the average market interest rate on the lease to the price of the machine and divide the total by the number of months.

Lease is only for companies. If you want to get a lease or even an offer for a lease, you need to open a business. Only after opening the company, banks can check the client's financial history and present him with a possible offer. If there is no company, there is no way to check whether you might receive a lease. For new business activities (just opened, less than a year), the minimum down payment for leasing is 20-30%. For new limited liability companies the minimum is 6 months of activity, income and 20-30% own payment.